100kw 150kw 200kw Dc Step Down Converter and Step up Dc Converter with Isolated Transformer for Energy Storage System

Product Description

Energy Storage System Converter
100kw 150kw 200kw dc step down converter and step up dc converter with isolated transformer for energy storage system
DC DC Converter Display
Product introduction
  • using IGBT from Mitsubishi company as the power components
  • using American ATEMEL company microprocessor as figure controller
  • perfect protection and warning functions
  • circuit frame compact, Max. Efficiency≥90%
  • with wide input voltage range
  • RS232/485/WIFI/GPRS communication
  • Tough screen English LCD, perfect display, interface-friendly
Product Internals
Product detail view 1 Product detail view 2 Product diagram
Product installation 1 Product installation 2 Product installation 3
Power Conversion System Performance Characteristics
Our energy storage products and system solutions solve power supply problems in areas with no and weak electricity, and achieve smart power supply and demand allocation. This system is designed for three-phase energy storage system, which can realize the functions of On grid power generation, off-grid inversion, and city power reverse charging. If the power grid is disconnected, the storage system can automatically and seamlessly switch to off-grid operation mode to ensure uninterrupted power supply.
System layout diagram
System Features:
  • Specially designed for smart grid and smart microgrid to accept power grid dispatching;
  • Meet the requirements of lead-acid battery, lithium battery, super capacitor, vanadium battery and other different forms of energy storage, and has a wide range of applications;
  • Bidirectional inverter, constant power, current, voltage charge and discharge and other battery charge and discharge modes can be selected;
  • With time period working mode setting function, set up reasonable working mode according to local power network characteristics;
  • Two AC interfaces, i.e. mains interface and load interface, to realize grid connected operation and independent isolated grid operation;
  • Perfect islanding detection and mode switching of parallel and off grid, when the power supply is suddenly cut off, the PCS can automatically and seamlessly switch to the off grid working mode, separate from the grid, and establish a micro grid to operate independently;
  • RS485, Ethernet, can bus and other communication interfaces are optional to realize remote monitoring;
  • The smart grid master control system can be interconnected with on grid solar inverter, on grid wind power system, tidal power generation system, diesel generator and other energy modes to form a hybrid energy smart grid, which can realize a variety of networking modes.
Function Introduction:
On grid mode: PCS has the following function when on grid mode:
Active power control function: PCS can accept the charge / discharge power command of grid monitoring system, and charge / discharge the energy storage battery according to the specified active power command.
Off grid mode: During off-grid operation, the PCS can withstand continuous power disturbance ranging from -100kVA to 100kVA, and the PCS can withstand 1.1 times of short-term rated power. During the transient process, the fluctuation range of equipment voltage frequency meets the technical specifications of PCS off grid in this technical agreement. After the system is stabilized again, the PCS can stabilize the system voltage frequency at 380V/50Hz.
On/Off grid Switching Function: PCS enables on / off grid switching capability, enabling seamless switching. The switching condition is that the system is three-phase four-wire system with three-phase load balance and unbalance can not exceed 20% of capacity. When PCS is connected to the grid, the switch on and off engages and the load is supplied by the grid. PCS can charge/discharge in the grid. If the power grid is powered off, the PCS control system detects that the switch is disconnected after the power grid is powered off, the PCS switches to off-grid operation mode and the load is supplied by the PCS.
During off-grid on-load operation, if the grid is restored, the PCS control system detects that the voltage of the grid is within normal range, adjusts the output voltage of the PCS to be consistent with the grid, and controls the switch-on and switch-off to engage. The load is restored to power supply from the grid, and the PCS is restored to on grid operation.
Functional diagram
Product parameter
Technical parameters of bidirectional inverter 50KW-200KW
AC Side parameters
Operation mode Continuous
AC wiring mode Three phase four wire
Rated output power 50KW 100KW 200KW
Output overload capacity 55KW 110KW 220KW
DC Side Parameters
Maximum DC power 55KW 110KW 220KW
DC voltage range Vdc 200-800Vdc 400-800Vdc 400-800V dc
Voltage accuracy ±1% ±1% ±1%
Steady flow accuracy ±1% ±1% ±1%
DC current ripple <5% IPP <5% IPP <5% IPP
On Grid charging and discharging mode Constant power
Rated grid voltage(AC) 220V / 380V / 440V 220V / 380V / 440V 220V / 380V / 440V
Grid voltage range(AC) ±20% ±20% ±20%
Rated grid frequency 50Hz / 60Hz 50Hz / 60Hz 50Hz / 60Hz
Grid frequency range ±10% ±10% ±10%
Rated power(THD) <3%(Standard grid)
Power factor ≥0.99 ( Rated power)
Independent inverter mode
Rated output voltage(AC) 220V / 380V / 440V±1%
Output voltage distortion <3% ( resistive load)
Rated output frequency 50Hz / 60Hz±1%
Voltage transition range <10% (Resistance load 0% <=>100%)
Load imbalance 100%
System Parameters
Max. conversion efficiency 95%( Include isolation transformer)
Noise <60dB
Protection Degree IP20
Working Temperature -25℃~+45℃
Cooling method Air cooling
Working humidity 0~95%
Working altitude ≤6000m, 2000m(Reduced usage for more than 2000m)
Emergency stop Yes (via emergency stop button)
Display Touch screen
Communication mode RS485,WIFI,GPRS,Ethernet (Modbus protocol)
Dimensions 750*600*1320mm 1460*860*1820mm 1460*860*1820mm
Weight 340KG 1.4t 1.6t
Technical parameters of bidirectional inverter 300KW-1000KW
AC Side parameters
Operation mode Continuous
AC wiring mode Three phase four wire
Rated output power 300KW 500KW 1000KW
Output overload capacity 330KW 550KW 1100KW
DC voltage range
Maximum DC power 330KW 550KW 1100KW
DC voltage range Vdc 400-800V dc 600-900V dc 600-900V dc
Voltage accuracy ±1% ±1% ±1%
Steady flow accuracy ±1% ±1% ±1%
DC current ripple <5% IPP <5% IPP <5% IPP
On Grid charging and discharging mode Constant power
Rated grid voltage(AC) 220V / 380V / 440V 220V / 380V / 440V 220V / 380V / 440V
Grid voltage range(AC) ±20% ±20% ±20%
Rated grid frequency 50Hz / 60Hz 50Hz / 60Hz 50Hz / 60Hz
Grid frequency range ±10% ±10% ±10%
Rated power(THD) <4%(Standard grid)
Power factor ≥0.99 ( Rated power)
Independent inverter mode
Rated output voltage(AC) 220V / 380V / 440V±1%
Output voltage distortion <3% ( resistive load)
Rated output frequency 50Hz / 60Hz ±1%
Voltage transition range <10% (Resistance load 0% <=>100%)
Load imbalance 100%
System Parameters
Max. conversion efficiency 95%( Include isolation transformer)
Noise <60dB
Protection Degree IP20
Working Temperature -25℃~+45℃
Cooling method Air cooling
Working humidity 0~95%
Working altitude ≤6000m, 2000m(Reduced usage for more than 2000m)
Emergency stop Yes (via emergency stop button)
Display Touch screen
Communication mode RS485,WIFI,GPRS,Ethernet (Modbus protocol)
Dimensions 2010*1060*2000mm 2800*1200*2000mm 4000*1200*2000mm
Weight 1.5t 2.5t 4t
Converter details 1 Converter details 2 Product line diagram
Product range 1 Product range 2
BUYERS FEEDBACK
Buyer Feedback Details
COMPANY PROFILE
Company overview
The company was established in 2004 and acquired two registered trademarks in the same year. After five years of accumulation in 2009, the company gradually matured steadily. The company purchased factory buildings with independent property rights, and the company relocated to start a new journey. In 2012, the Ministry of Foreign Trade was established to open up markets and begin to expand foreign markets. In 2015, the company achieved rapid development, with 2 invention patents, 6 utility model patents, 1 appearance patents, obtained the "high-tech enterprise certificate" recognition, and obtained the ISO 9001 quality management system certification. In 2018, the company continued to innovate, with four invention patents, six utility model patents, and two software registration rights, and again successfully recognized high-tech enterprises. On July 10, 2019, it passed the certification of intellectual property management system. In 2020, three patents for invention and six patents for utility models were applied for.
Company office and factory
1. Our main products are off grid wind turbine controller, On grid wind turbine controller, solar charging controller, wind-light complementary controller, wind-light complementary street lamp controller, On grid inverter, off grid inverter, frequency converter, stabilized frequency power supply, etc.

2. With first-class manufacturing technology, advanced technology and equipment, strong technical force, perfect testing means and personnel management, we have carried out 17 research and development projects in the last three years, completed 16 transformation of scientific and technological achievements, and invested all by itself to implement the transformation, averaging 5.3 transformation of scientific and technological achievements each year.

3. Technological innovation is taken as the basis of enterprise development, annual R&D cost is not less than 20% of sales revenue, and we continuously explore advanced technologies in the field of new energy power sources, such as electromagnetic control technology for wind turbines, MPPT technology, yaw wind turbines control technology, wind and solar complementary system Internet of Things monitoring, etc. Now we have five national invention patents for core technologies, twelve utility model patents, and the control technology for wind turbines has reached the advanced international level.

4. We have a complete product quality assurance system and 9001 certification. Perform comprehensive quality control, rigorous test one by one, each performance is superior to the relevant national standards, all products have passed the EU CE certification. Ensure user safety and reliable use. Now our products have been the preferred supporting products for the well-known domestic manufacturers. The products export to more than 120 countries and regions, such as Germany, Japan, the United States, the United Kingdom, Canada, Australia, Egypt, Brazil, Saudi Arabia, and have established a good image in the domestic and foreign markets.

5. We are based on the market, pay attention to customers, provide high-quality products, adhere to technological progress, scientific management and standardized operation are the key to our success. We will jointly meet the challenges of the new century, shape a good image outside, and construct the blueprint of a modern enterprise in an all-round and three-dimensional way.
OUR FACTORY
Factory view 1 Factory view 2 Factory view 3
Factory view 4 Factory view 5 Factory view 6
Factory view 7 Factory view 8
FAQ
1. Can you provide OEM service?

Yes, we can.

2. Can you design the complete solar wind power system?

Yes, we can design the system according to your requirements.

3. Factory or trading company?

We are a manufacturer of wind turbine solar controllers and various inverters.

4. Is customization acceptable?

Yes, we can make products according to customers' requirements.

5. May I visit the factory?

Yes, welcome to our factory.

6. Can you provide samples?

Yes, we can provide samples for testing.

Product overview footer

Related Products