Pre-engineered off-grid and hybrid grid-connected power structures configured for maximum solar resource harvesting in the Middle East.
Israel's Ministry of Energy and Infrastructure has targeted 30% of its total electricity generation from renewable sources by 2030, with a massive focus on distributed solar photovoltaics (PV) coupled with Battery Energy Storage Systems (BESS). Industrial zones in Ashdod, Haifa, and the southern Negev desert region are seeing unprecedented solar deployment to bypass traditional grid congestion.
Under new regulatory framework reforms, virtual wheeling allows commercial entities to purchase clean power from private producers. This regulatory pivot has triggered a rapid demand for stable, high-capacity, grid-interactive energy hardware like solar hybrid controllers, bidirectional converters, and permanent magnet generators that can handle regional fluctuations while meeting strict utility codes.
A Globally Recognized National High-Tech Pioneer in Renewable Power Electronics Since 2004
Founded in 2004, Jinan Deming Power Equipment Co., Ltd. is a nationally certified high-tech enterprise dedicated to the design, execution, and manufacturing of renewable energy control platforms. Our core technical capability centers around our dedicated R&D unit, comprised of 16 senior engineers containing university doctoral supervisors and post-graduate degree holders.
Deming invests a minimum of 20% of annual gross sales revenue back into continuous technology development. Within the past three years alone, our engineering branch completed 17 R&D projects, turning 16 scientific breakthroughs into standardized commercial designs exported to over 120 countries, including high-standard zones such as Germany, Japan, the United States, and the United Kingdom.
Manufacturing Excellence
Global Destination Markets
R&D Reinvestment Rate
Certified System Quality
Each unit leaves our factory after passing a battery of testing routines using professional instruments, guaranteeing seamless installation on site in Israel.
Circuit assembly
Circuit board assembly
Debugging process
Quality inspection process
Copper bar production equipment
Electric ferrowire
Electric drill
Reflow soldering machine
Workbench
Precision Multimeter
LCR AutoTester
Semiconductor Characteristic Plotter
Digital Oscilloscope
Power Quality Analyzer
Clamp current meter
Drawing Design
Computerized Simulation Platform
Sourcing directly from Jinan Deming ensures advanced manufacturing pricing paired with customized configuration and robust logistical support.
By managing key components (SMT layout, structural engineering, copper bar fabrication) under one roof, we eliminate intermediate markups. This enables us to offer high-efficiency bidirectional DC-DC converters and high-power simulators at competitive rates compared to Western OEMs.
Our engineers ensure compliance with Israel Electric Corporation (IEC) grid-connection guidelines. From anti-islanding parameters to specific grid voltage adjustments (400V/230V, 50Hz), our hardware integrates into local networks without authorization delays.
We maintain strong relations with global sea and air cargo partners. Industrial systems are crated in sea-worthy packaging for direct shipping to Haifa and Ashdod ports, including all necessary documents for fast custom clearance.
Compare technical parameters across our primary conversion and wind/solar management systems configured for Israeli grid and off-grid scenarios.
| System Component / System Name | Input Capability | Conversion Efficiency | Thermal / IP Protection | Typical Israeli Application |
|---|---|---|---|---|
| Stackable Bidirectional DC-DC Converter | Wide Range DC (300V-500V) | > 98.2% Rated Peak | Forced Air, IP20 Cabinet | Kibbutz BESS & Industrial Peak Shaving |
| C&I Solar Hybrid Inverter (75kW) | Triple Stage MPPT (Solar/Wind) | > 97.8% (CEC Weighted) | IP65 Enclosure Protection | Roof Mount Commercial PV / Agricultural Integration |
| Permanent Magnet Alternator Converter | Low-RPM Alternating Multi-pole | > 96.5% Hydro/Wind | Anti-Saline Casing Protection | Coastal Wind/Hydro Integration |
| 115V / 400Hz Aviation Converter | 400Hz Constant Regulation | > 95% Pure Sine Wave | Standard Outdoor Hangar Rating | Aircraft Maintenance Facilities (Tel Nof/Haifa) |
Incorporate wind, solar, and battery storage subsystems into a single localized microgrid architecture.
Engineered to operate in high ambient temperatures, high humidity, and complex grid conditions across Israel.
Israel's farming communities require solar hybrid controllers that can manage deep tube-well water pumping systems and livestock cooling fans, switching between off-grid battery power and backup wind turbines during night periods.
Distributed residential and light industrial communities utilize our 100kW+ complete off-grid solar kits and stackable bidirectional DC-DC converters to integrate local battery storage, ensuring seamless islanded operation.
Solar and wind setups in proximity to the Mediterranean coast (Ashdod, Haifa) or the Dead Sea utilize our permanent magnet generators and anti-corrosive controllers, protected against salt-mist and high air moisture levels.
Key information regarding imports, technical integration, and system setups for Israeli purchasers.
Our grid-connected systems, especially our hybrid inverters and DC-DC converters, are designed to comply with local frequency guidelines (50Hz) and connection thresholds. We offer customizable anti-islanding parameters, adjustable grid-protection relay limits, and modern Modbus interfaces to allow local utility operators to inspect and monitor grid integration settings.
Yes. Our equipment incorporates custom thermal designs. We utilize thick, CNC-milled aluminum heat sinks, premium temperature-rated internal capacitors, and intelligent multi-fan speed controls. The systems operate at full capacity without derating up to 45°C, ensuring reliable operation in desert environments.
For standard equipment (e.g., 5kW to 50kW controllers), production takes between 15 to 20 business days. Custom megawatt-class bidirectional converters require 30 to 45 days. Ocean shipping from Qingdao or Shanghai port to Ashdod/Haifa ports usually ranges between 25 to 35 days, including real-time tracking updates.
Yes. Approximately 35% of our production volume consists of OEM partnerships. We customize structural chassis, digital LED/LCD readouts, software logic interfaces, and external paint specifications to align with local requirements. Our team provides comprehensive technical support and schematic drawings before manufacturing.
Partner with Jinan Deming Power Equipment Co., Ltd. for direct-from-factory pricing, certified electrical engineering, and tailored configurations.
Send Inquiry Now
Demin Power
