FKJ-GT 2KW 3KW 5KW 10KW on Grid MPPT Wind Turbine Solar Hybrid Controllers Grid Tie Controller

Product Description

Wind Turbine System Image 1
Wind Turbine System Image 2
Product introduction
On Grid Wind Turbine System
The On grid wind turbine system is composed of wind turbine, on grid controller, on grid inverter, metering device, and power distribution system. Wind energy is converted into AC electrical energy by the wind turbine, and then converted into DC electrical energy by the on grid controller, and then DC electrical energy is converted into AC electrical energy of the same frequency and phase as the grid by the on grid inverter, and part of the power is supplied to the local load. Surplus power is fed into the grid.
On Grid Wind Turbine System Diagram
Performance characteristics of on grid wind turbine controller
  • This product is produced according to the industry standard JB/T6939.1-2004 and the national standard GB/T19115.1-2003. It can also be produced according to the technical requirements of users.
  • Color touch screen display. Visually display the working status of the controller. Rich data display: real-time wind turbine voltage and current, solar panel voltage and current, DC output voltage and current, and cumulative power generation.
  • The technical parameters of the controller can be adjusted through the touch screen. The control parameters can be adjusted for different wind turbines.
  • Two sets of control systems are adopted, PWM constant voltage and constant current system + three-phase braking system.
  • Current control, wind speed control and wind turbine speed control can be added, and the control parameters can be set.
  • In the case of strong winds, the constant voltage and constant current output of the controller provides DC constant voltage power to ensure the normal operation of the inverter.
  • When the on grid inverter is offline, the controller outputs a constant voltage and waits for the inverter to return to work.
  • When the grid is cut off, the controller will automatically control wind turbine brake and the inverter will stop output to grid. When the grid resuming, the controller stops brake wind turbine and the inverter will resume power supply.
  • The inside of the controller is equipped with surge protector. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.
  • Controller has an emergency stop switch, in case of emergency, when the button is pressed the front panel, cut off all power supply of the controller and the wind turbine will immediately brake.
  • The controller has a manual brake switch. To using this switch, the wind turbine will brake.
  • Using Modbus communication protocol. Convenient for customers to conduct secondary development.
  • Support RS485, WiFi, GPRS, Ethernet and other communication methods. You can monitor the working status of the on grid wind power generation system in real time through the PC or mobile phone, and you can also query the historical working status. The mobile terminal is compatible with Android and IOS. All data can be connected to the Internet of Things.
  • The solar panel control system can be added according to customer needs.
  • The controller can add various control functions such as yaw control, pitch control, mechanical folding tail control, mechanical brake, hydraulic brake, electromagnetic brake, etc. according to the type of wind turbine.
Controller Diagram 1 Controller Diagram 2 Controller Diagram 3
Performance Graph
Products Description
Type FKJ-GT1.5KW FKJ-GT2KW FKJ-GT3KW
Wind turbine rated power1.5KW2KW3KW
Wind turbine Max. power3KW4KW6KW
Wind turbine rated voltageAC220VAC220VAC220V
Solar panels power (optional)300W600W900W
FunctionRectifier, control, DC output
Automatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arrester
Manual functionManual brake, reset, emergency switch
Display modeLCD
Display contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage≥320dc≥320dc≥320dc
Wind turbine 3-phase dump load voltage350±5Vdc350±5Vdc350±5Vdc
Wind turbine 3-phase dump load time-lapse12-20 min12-20 min12-20 min
Solar panels fuse2A3A4A
PWM dump load fuse10A10A16A
Fuse of DC output16A16A20A
Work environment temperature-30-60°C
Relative humidity<90% No condensation
Noise (1m)<40dB
Degree of protectionIP20 (Indoor) IP65 (Outdoors)
Cooling methodForced air cooling
Communication interface (optional)RS485/USB/GPRS/WIFI/Ethernet
Temperature compensation (optional)-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller (mm)510*360*240510*360*240510*360*240
Weight of the controller15Kg17Kg17Kg
Size of the dump load (mm)410*360*120410*360*120400*410*250
Weight of the dump load7Kg9Kg13Kg
Type FKJ-GT5KW (220V) FKJ-GT5KW (380V) FKJ-GT10KW
Wind turbine rated power5KW5KW10KW
Wind turbine Max. power10KW10KW20KW
Wind turbine rated voltageAC220VAC380-400VAC380-400V
Solar panels power (optional)1.5KW1.5KW3KW
FunctionRectifier, control, DC output
Automatic protection functionOver voltage protection, network electric cut off protection, regulated supply output, arrester
Manual functionManual brake, reset, emergency switch
Display modeLCD
Display contentWind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage≥320dc≥520dc≥520dc
Wind turbine 3-phase dump load voltage350±5Vdc540±5Vdc540±5Vdc
Wind turbine 3-phase dump load time-lapse12-20 min12-20 min12-20 min
Solar panels fuse5A5A8A
PWM dump load fuse25A16A32A
Fuse of DC output32A20A40A
Work environment temperature-30-60°C
Relative humidity<90% No condensation
Noise (1m)<40dB
Degree of protectionIP20 (Indoor) IP65 (Outdoors)
Cooling methodForced air cooling
Communication interface (optional)RS485/USB/GPRS/WIFI/Ethernet
Temperature compensation (optional)-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller (mm)510*360*240510*360*240580*400*240
Weight of the controller18Kg18Kg23Kg
Size of the dump load (mm)600*450*380600*450*380690*450*530
Weight of the dump load28Kg28Kg35Kg
Product Quality Standards
Product application scenario
Application Scenario 1 Application Scenario 2
BUYERS FEEDBACK
Buyer Feedback Report
COMPANY PROFILE
Office building
1. Our main products are off grid wind turbine controller, On grid wind turbine controller, solar charging controller, wind-light complementary controller, wind-light complementary street lamp controller, On grid inverter, off grid inverter, frequency converter, stabilized frequency power supply, etc.

2. With first-class manufacturing technology, advanced technology and equipment, strong technical force, perfect testing means and personnel management, we have carried out 17 research and development projects in the last three years, completed 16 transformation of scientific and technological achievements, and invested all by itself to implement the transformation, averaging 5.3 transformation of scientific and technological achievements each year.

3. We take technological innovation as the basis of enterprise development, annual R&D cost is not less than 20% of sales revenue, and continuously explore advanced technologies in the field of new energy power sources, such as electromagnetic control technology for wind turbines, MPPT technology, yaw wind turbines control technology, wind and solar complementary system Internet of Things monitoring, etc. Now we have five national invention patents for core technologies, twelve utility model patents, and the control technology for wind turbines has reached the advanced international level.

4. We have a complete product quality assurance system and ISO 9001 certification. Perform comprehensive quality control, rigorous test one by one, each performance is superior to the relevant national standards, all products have passed the EU CE certification. Ensure user safety and reliable use. Now our products have been the preferred supporting products for the well-known manufacturers. The products export to more than 120 countries and regions, such as Germany, Japan, the United States, the United Kingdom, Canada, Australia, Egypt, Brazil, Saudi Arabia, and have established a good image in the domestic and foreign markets.

5. We are based on the market, pay attention to customers, provide high-quality products, adhere to technological progress, scientific management and standardized operation are the key to our success. We will jointly meet the challenges of the new century, shape a good image outside, and construct the blueprint of a modern enterprise in an all-round and three-dimensional way.
OUR FACTORY
Factory Workshop 1 Factory Workshop 2 Factory Workshop 3 Factory Workshop 4 Factory Workshop 5 Factory Workshop 6 Factory Workshop 7 Factory Workshop 8
FAQ
Can you provide OEM service?
Yes, we can.
Can you design the complete solar wind power system?
Yes, we can design the system according to your requirements.
Are you a factory or trading company?
We are a manufacturer of wind turbine solar controllers and various inverters.
Is customization acceptable?
Yes, we can make products according to customers' requirements.
May I visit the factory?
Yes, welcome to our factory.
Can you provide samples?
Yes, we can provide samples for testing.
Product Certificate Banner

Related Products